Kitchen Hood Fire Suppression System in Delhi NCR

Kitchen Hood Fire Suppression System in Delhi NCR

A kitchen hood fire suppression system is fitted in the hood, the duct and above the cooking line. When it senses a fire, it sprays a wet chemical that cools burning oil and covers it with a soapy layer so it cannot flare up again, and it shuts off the gas at the same time. Restaurants, hotels and cloud kitchens use it because hood fires spread faster than anyone can react.

A busy Delhi kitchen runs fryers, woks and tandoors for hours, and grease slowly builds up in the hood and the duct above them. When that grease catches, the fire goes up into the duct where nobody can reach it, and a bucket of water only makes it worse. A hood system watches that whole area for you, even at 2 am when the kitchen is closed.

Where is the Kitchen Hood Fire Suppression System used?

  • Restaurants and QSR outlets
  • Hotel and banquet kitchens
  • Cloud kitchens
  • Hospital and college canteens
  • Industrial and office canteens
  • Food courts and mall kitchens
  • Tandoor and fryer stations
  • Exhaust hoods and ducts

How does the Kitchen Hood Fire Suppression System work?

A detection line runs through the hood just above the appliances. It is either a set of fusible links or a heat-sensing tube. When a fire heats it, the system fires wet chemical agent through nozzles pointed at each appliance, into the hood and into the duct. At the same moment a valve cuts the gas to the cooking line, so the fire loses its fuel. The agent reacts with hot oil and forms a soapy crust on top, which cools it and stops it lighting up again. There is also a pull handle near the exit if staff spot the fire first.

Kitchen Hood Fire Suppression System at a glance

AgentWet chemical (potassium-based) for cooking oil and fat fires
CoverageCooking appliances, hood plenum and exhaust duct
DetectionFusible links or heat detection tube in the hood
Gas shut-offAutomatic gas valve closes on discharge
Power neededMechanical or pneumatic release, works without electricity
Manual releasePull station near the exit
Reference standardsUL 300 (testing of kitchen systems); NFPA 17A and NFPA 96

Kitchen hood system vs normal extinguisher

Kitchen hood systemClass K / wet chemical extinguisherABC powder extinguisher
Works automaticallyYesNo, needs a personNo, needs a person
Reaches inside hood and ductYesNoNo
Shuts off gasYesNoNo
Good on cooking oil firesYesYesNot recommended

Most kitchens need both: the fixed hood system and a wet chemical extinguisher next to the line for small flare-ups. We handle both under one extinguisher and AMC visit.

How we work, step by step

  1. Site visit: We come and see the space ourselves, measure it, and look at what is likely to catch fire, how air moves, where the gaps are and where power comes from.
  2. Design: We pick the agent, size the system and send you a simple layout with quantities, so you know exactly what you are paying for.
  3. Supply: Cylinders, detectors, nozzles, pipes and the panel arrive as per the design you approved, nothing swapped quietly.
  4. Installation: Our team fits and wires everything. In live sites we plan the noisy work around your working hours.
  5. Testing: Before we call it done, we test detection, alarms, the release circuit and pressures, and show you the results.
  6. Handover: We walk your staff through the alarms, the abort and manual release, and what to do if the system ever goes off.
  7. AMC: After that, regular visits keep it ready. A system that is never checked is a system you are hoping works.

What we check on AMC visits

  • Nozzle position and cap check
  • Fusible link or detection tube inspection and replacement when due
  • Gas shut-off valve test
  • Agent cylinder pressure check
  • Pull station and cable check
  • Grease build-up report for the hood and duct
  • Refill and recommission after a discharge

Kitchens change. A new fryer or a moved range can leave an appliance uncovered, so tell us before you change the line. Visit frequency is set in the AMC.

You may also need

Running a restaurant or cloud kitchen in Delhi NCR? Call or WhatsApp +91 85870 53556, or send an enquiry. Tell us your service hours and we will plan the visit around them.

Design, testing & support

Kitchen hood fire suppression for restaurants, hotels, cloud kitchens and canteens across Delhi NCR, plus servicing of systems already installed.

Site-specific design

Each system is sized for the room, panel, kitchen, building or vehicle it protects.

Tested at handover

Every installation is tested and commissioned before handover.

  • Free site survey across Delhi NCR.
  • System chosen for your actual fire risk.
  • Protects equipment, people and operations.
  • Reduces downtime and repair costs.
  • Professional installation, testing and commissioning.
  • Regular inspection, maintenance and AMC services.

Everything you need to know about Kitchen Hood Fire Suppression System in Delhi NCR

It watches the hood, duct and cooking line. If a fire starts, it sprays wet chemical on the appliances and into the duct, and shuts off the gas, all on its own.

Water hits burning oil, turns to steam instantly and throws flaming oil around the kitchen. Wet chemical cools the oil and seals the surface instead.

Yes. Most hood systems are mechanical or pneumatic, so they do not need electricity to go off.

Hood aur duct ki aag bahut tezi se failti hai aur hath se bujhana mushkil hota hai, isliye restaurants, hotels aur cloud kitchens me ye system lagwana samajhdari hai. Fire NOC me ye compulsory hai ya nahi, ye apne fire officer se confirm karein. Documents me hum madad kar dete hain.

Usually not for long. Most of the work can be done at night or on a closed day.

Yes. We inspect it, tell you what needs fixing, and can take it under our AMC.

Call Fire Grid Safety Solutions